CBT Motorcycle Course For Novice Riders
A1 permits you to ride a scooter, small motorcycle, and also take the pillion ride of a passenger in the event that you are 17 years old or older.
Two days of instruction without any tests. It's an excellent introduction to riding, with a focus on reviewing the primary parts of a bike, as well as slow exercises for controlling.
Compulsory basic training (CBT)
CBT is the first course any novice rider must take. It typically takes a full day to complete and if you reach a satisfactory standard at the end of the day, your instructor will present you with a certificate of accomplishment that is known as a DL196.
In this course, you will learn the basics of operating a motorcycle. You will be guided by an experienced instructor throughout the course of the day. You'll also receive a short theory session which will teach you about the highway code and the rules of the road and safe and safe lane positioning. You'll learn how to inspect and maintain your bike, and how to carry a pillion rider (if necessary).
The next part of the CBT will involve riding on the spot. Your instructor will mark an area that is safe where you can practice your skills. You will start off slow and then work on the basic safety checks before moving on and stopping the bike and stopping properly. During this time, your instructor will be in radio contact with you and assist until they are confident that you are able to perform these exercises at a safe level.
This part of the course introduces you to the different types and kinds of roads and traffic. You'll learn to be safe around roundabouts and traffic lights as well as how to use one-way streets. You'll also learn the basics of cornering as well as figure of eight and emergency stops.
This is the final part of the CBT and your instructor will take you on a variety of different roads. You'll be in constant radio contact with your instructor, who will keep track of your progress at all times. You will receive a CBT DL196 certificate if you successfully demonstrate that you can operate a motorbike and handle various road situations.
While it has been around for a while now, CBT is still a vital element of the motorcycling experience. In fact, we continue to see significant improvement in accident statistics since its inception. It is essential to choose a motorcycle training school that provides comprehensive CBT courses to ensure you are well-prepared and ready to go into the world of two-wheeled motoring.
Module 1 Theory Test
The first step to obtaining an A1 license is passing the motorcycle theory test. It is a 40-minute test that assesses your understanding of traffic rules, road signs, and general safety. To increase your chances of passing, it's recommended to read the Highway Code prior to taking the test.
The day after your CBT, you will begin module 1 training on the test-capacity bike for your category of licence. If you're looking for A1, the bike will be a Honda Monkey. The course is packed with off-road control and balance practice to prepare you the required moves for the module 1 test. You will also visit the DVSA test centre to become familiar with the procedures and marking system that are used for each test.
After completing your training, you will be able to take your module 1 test at a DVSA-approved motorcycle testing center. You'll need to bring your CBT certificate, along with a valid passport or driving licence.
After passing your Module 1, you'll then be able to take your Module 2 test, which is conducted out on the road. The examiner will lead you on a short trip around the area, with around 35 minutes of independent riding to complete. The examiner will be assessing your ability to multitask while following road signs and will require you to demonstrate your driving skills.
After successfully passing both your Module 1 and Module 2 after which you will be able to enjoy the freedom of an A1 light licence. This permits you to ride a bike up to 125cc, without a learner's licence, and will not require you to display your L-plates. A1 licences also permit you to ride with a companion and you don't need to go through the CBT every two years. This is an excellent alternative for those who want to enjoy the thrill of motorcycling. The next step up from an A1 licence is an A license that is not restricted and requires a full driving license.

Module 2: Practical Test
Module 2 is the practical component of your motorcycle license. After you have passed Module 1 and the theory test, you are now ready to take Module 2. This test will grant you an A1 license, which permits you to ride bikes with a capacity of up to 125cc, and with an maximum power of 11 BHP. You can also carry a passenger and ride on motorways.
The Mod 2 test is an independent riding test that takes about 10 minutes. The examiner will be following you along a predetermined route that has varying traffic and road conditions. The route includes busy junctions, roundabouts, and dual carriageways. You'll have to be able to navigate in a variety of conditions.
In addition to driving on busy roads in addition, the Module 2 test will assess your ability to be observant and anticipate. This is crucial as it allows you to make decisions quickly when out on the road. For instance, if you're driving on the road and observe a car advancing towards your path, you'll have to be able to react quickly.
You will also be expected demonstrate a good control of your speed. This includes being able pull away smoothly, stopping with confidence, and maintaining speed. You should be able to demonstrate good braking, and execute an controlled U-turn when necessary.
You'll also be assessed on how well you can signal and shift gears. You'll be required to signal before overtaking another vehicle, when leaving an intersection, and switch gears when needed.
After passing both the parts of Module 2, you will receive a certificate with your A1 license. You can then ride your new bike with fashion and comfort through the countryside, or even to work. Your new A1 licence is your ticket to freedom and adventure whether you ride supermotos or a scooter.
Licensing
This course is intended for those who have already completed Module 1 and 2 and want to improve their riding abilities and build a relationship with their bike. zapisy na egzamin a1 involves more advanced training and exercises such as observing your turns and leaning to steer the bike at higher speeds. It also covers hazard prevention and high speed cornering, in addition to braking and braking at high speeds. You will spend 6 hours out on the road with a Ride Coach and you will be able to select your own bike for this class.
This is an excellent option for riders who aren't sure if the full license is what they really would like. It provides you with a full training package including the Module 1 and 2 tests and the off-road maneuvers for your Cat A licence, so it provides everything you need to get out on the road without having to go through the test in the first place.
You will start with smaller bikes to get comfortable with your riding posture and your balance before moving up to a larger bike in your category. It is typically 500cc motorbike. You will own your own bike for this class and you can wear your own helmet, or you can purchase one from us.
The BRC is a rigorous five-day course designed to equip you with the necessary knowledge and skills necessary to become a licensed motorcycle driver in Tennessee. After successful completion of the BRC will allow you to skip the written and driving tests at the TN Department of Motor Vehicles.
You must be at least 16 years of age to participate in the Basic RiderCourse (BRC). If you are under 18 you must ask your parent or guardian to sign the Covid Release and Waiver of Indemnification form (click here) as well as the Motorcycle Safety Program Parent/Guardian Agreement. Your parent or guardian will also have to complete the MSF online course prior to attending your BRC course.